|
<< Click to Display Table of Contents >> Draw Curves |
  
|
|
<< Click to Display Table of Contents >> Draw Curves |
|
Purpose
To draw arcs (in a similar way to the CAD Fillet command) with specified radii. The starting point is a series of Lines.
Operation
Return to accept the default layer or enter an alternative. Select the first Line, select the second Line, enter the radius (this will be under half of the Nominal maximum radius for typical use). Repeat by selecting a new first Line etc. The program constructs an Arc, trims the Lines and marks the IP. Use the CAD Pedit command to join as one 2D Polyline.
Three defining Lines on the left, three Lines with two Arcs plus IPs in blue on the right